Cable Assembly · N Type Cable Assembly
N Type Cable Assembly: Engineered To IPC/WHMA-A-620 Class 3.
N Type Cable Assembly programs built on the Cavite floor — UFLPA input-traceability support; Philippine origin outside the China-specific Section 301 tariffs, IPC/WHMA-A-620 Class 3 acceptance by default. Send the drawing or part number and we will reply with unit price, lead time, and a sample plan inside 12 hours.
Buyer Reality
Where Most n type cable assembly Programs Slip.
Issue #01
N-type pin alignment after rework
Recheck pin alignment and mating dimensions after any connector rework.
Issue #02
N-male body crack at 28 N axial pull on flexible feeder
Flexible 1/4" feeder tugs crack the N-male flange at the cable entry. Our brass body with a back-shell strain-relief boot plus integral grommet passes 50 N pull per IPC/WHMA-A-620 §9.3.4.
Issue #03
Reverse-polarity RP-N inadvertently mated on cell-tower swaps
Tower techs cross-mate RP-N to standard N and crush the centre dielectric. Our colour-coded boot plus laser-etched RP marker per IEC 61169-16 stops the swap on field maintenance.
Issue #04
N-type weatherproof seal failure at 1 atm overpressure
Single O-ring weatherproof N seals leak past 1 atm IP67 chamber pressure. Our dual O-ring + grease pack design passes IEC 60529 IP68 to 2 m / 24 h.
Issue #05
Insertion loss spec breach past 6 GHz on 1/2" superflex feeder
1/2" superflex with poor centre-conductor solder loses 0.3 dB/m past 6 GHz. We use a captive-pin solder + crimp ferrule per IEC 61169-16 §5.1 cutting loss to 0.06 dB/m at 6 GHz.
What We Build
The Capability Stack Behind The Build.
N-type interface inspection
Check connector interface dimensions against the approved component drawing.
IP68 dual-O-ring N-type build per IEC 60529
Dual nitrile O-ring stack with silicone grease pack passes IP68 2 m / 24 h immersion. Family qualified on a Bemis IP68 chamber.
Captive-pin solder + crimp ferrule per IEC 61169-16
Captive-pin centre conductor with crimp ferrule for 1/2" / 7/8" superflex feeder. Pin-tip dimension certified per drawing.
RP-N vs N hard-fail on Cirris with IEC 61169-16 markers
Cirris CH2 program plus laser-etched RP boot per IEC 61169-16 §3 prevents reverse-polarity cross-mate on field swaps.
18 GHz VNA insertion-loss cert per assembly
R&S ZNB18 VNA verifies N-type insertion loss to ≤ 0.06 dB/m at 6 GHz, ≤ 0.18 dB/m at 18 GHz. S-parameters archived per assembly serial.
Cirris CR/CH 100% continuity and 1500 V HiPot
PEZA certificate of origin on every commercial invoice — Philippine origin, outside China Section 301
Flex-life validation by program per our in-house chainflex bend-cycle test
FAQ
Procurement Questions, Answered.
Q.01What is the minimum order quantity for n type cable assembly?
+
What is the minimum order quantity for n type cable assembly?
Q.02What lead time do you commit to on n type cable assembly after RFQ?
+
What lead time do you commit to on n type cable assembly after RFQ?
Q.03Are n type cable assembly shipments subject to the China Section 301 tariffs?
+
Are n type cable assembly shipments subject to the China Section 301 tariffs?
Q.04Do you ship n type cable assembly samples for free?
+
Do you ship n type cable assembly samples for free?
Q.05Can you handle the n type cable assembly engineering review before we have a finalized drawing?
+
Can you handle the n type cable assembly engineering review before we have a finalized drawing?
Q.06Do you offer paid prototype builds? (N Type)
+
Do you offer paid prototype builds? (N Type)
Q.07How do you protect customer IP? (N Type)
+
How do you protect customer IP? (N Type)
Q.08Which certifications ship with lots? (N Type)
+
Which certifications ship with lots? (N Type)
Q.09What payment terms are typical? (N Type)
+
What payment terms are typical? (N Type)
Q.10How fast is DFM feedback? (N Type)
+
How fast is DFM feedback? (N Type)
Industries
Capabilities
Submit RFQ
Submit your N Type Cable Assembly drawing.
Send the drawing, BOM, or part number plus annual volume. Engineering desk replies within 12 hours with unit price, lead time, sample plan, and a certificate of origin documenting Philippine origin if your customs broker needs it. Standards reference: IPC standards (https://en.wikipedia.org/wiki/IPC_%28electronics%29), IATF 16949 (https://en.wikipedia.org/wiki/ISO/TS_16949).
Reviewed by
Chen Zhongyong — Department Head · Wire Harness, XUDONG Philippines
Philippines-based, with years of factory management experience across the Cavite wire-harness operation. Coordinates every production stage — from drawing and BOM review through crimping, assembly, and test — with strong wire-harness production-coordination capability.
Next Step
Ready For Your N Type Cable Assembly Quote?
Send the drawing, BOM, or part number. We reply within 12 hours with unit price, lead time, and a sample plan. Quote returned within 12 hours. NDA on file. No obligation.