Cables · Gmsl Cable
Gmsl Cable: Material Library, Lot-Traceable.
Gmsl Cable programs built on the Cavite floor — UFLPA-clean Philippine origin, Section 301 tariff-free, IPC/WHMA-A-620 Class 3 acceptance by default. Send the drawing or part number and we will reply with unit price, lead time, and a sample plan inside 12 hours.
Buyer Reality
Where Most gmsl cable Programs Slip.
Issue #01
GMSL2 6 Gbps SerDes loses lock above 15 m at -3 dB/m
Maxim MAX96717 / MAX96724 SerDes drops link when STP cable loss exceeds the -8 dB budget at 3 GHz Nyquist. We sweep insertion loss on every coax against ISO 21111-7 §6.4 — assemblies above -3 dB/m at 3 GHz are quarantined.
Issue #02
FAKRA HSD coding key wrong color shorts ADAS power
FAKRA SMB / Mini-FAKRA HSD coding keys (A/B/C/D/E/Z) cross-mate when the operator pulls from the wrong bin and route 12 V into a sensor return. Our pick-light bins lock the FAKRA key color to the customer drawing rev per USCAR-2 §6.7.
Issue #03
Coax shield braid coverage drops under 95% at strip
GMSL coax with tinned-copper braid below 95% coverage drives EMI failure at 800 MHz per CISPR 25 Class 5. Our incoming inspection counts braid picks under microscope on every reel against the IEC 61196-1 spec.
Issue #04
GMSL2 ESD strike fries 50 ohm termination at hot-plug
Hot-plug ESD events into a powered MAX96724 deserializer kill the 50 ohm termination if the cable shield is not ESD-bonded to chassis at both ends per ISO 10605. Our PCBA grounding tab is laser-welded — not bolted — to chassis at panel.
Issue #05
50 ohm coax impedance drifts to 47 ohm at jacket extrusion
GMSL coax dielectric concentricity off by 0.05 mm pulls characteristic impedance from 50 to 47 ohm — silently fails ISO 21111-7 link margin. We TDR-sweep every reel at receiving and reject lots outside 50 ± 1.5 ohm.
What We Build
The Capability Stack Behind The Build.
ISO 21111-7 / ISO 17215 GMSL link verification
GMSL2 / GMSL3 link verification per ISO 21111-7 §6.4 (link integrity) and ISO 17215 (camera over coax). Insertion loss, return loss, BER ≤ 1e-12 confirmed per harness on a Tektronix BERT.
USCAR-2 / USCAR-21 connector qualification
FAKRA SMB, Mini-FAKRA HSD, and Rosenberger H-MTD assemblies qualified per USCAR-2 (connector performance) and USCAR-21 (sealed connector). Mate/unmate, vibration, fluid resistance run on-site.
CISPR 25 Class 5 EMI bench
On-site GTEM cell qualifies GMSL coax assemblies to CISPR 25 Class 5 — the strictest automotive EMI class. Test report attached per program; deviations flagged with shielding-stack alternates.
TDR impedance sweep 50 ± 1.5 ohm
Tektronix DSA8300 sampling oscilloscope with 80E04 head sweeps every coax reel at receiving. Lots outside 50 ± 1.5 ohm characteristic impedance returned to vendor under formal NCR.
Rosenberger / TE / Molex MTD authorized
Rosenberger H-MTD, TE MATE-AX, Molex Mini-FAKRA sourced through factory-authorized channels with lot-coded packaging. Gray-market and parallel-import parts rejected at goods-in.
Real Project Snapshot · US · marine · 2025-Q3 → 2026-Q1
A Build We Already Shipped In This Lane.
Scenario
During the quoting phase for a US marine vessel manufacturer, cost competitiveness was a critical decision factor against incumbent suppliers.
Challenge
The customer required high cost-competitiveness, but standard materials led to higher pricing. Using alternative Chinese-manufactured materials raised potential concerns about reliability and compliance from the customer.
Outcome
Overcame customer hesitation regarding alternative materials, proving cost-effectiveness without sacrificing quality, which led to the customer approving the tooling phase.
Anonymized customer detail. Concrete numbers preserved verbatim.
12-hour RFQ response from the engineering desk, not sales
PEZA Form A on every commercial invoice — zero MFN, zero 301
PPAP Level 3 generated during sample run, not retro-fitted
FAQ
Procurement Questions, Answered.
Q.01What is the minimum order quantity for gmsl cable?
+
What is the minimum order quantity for gmsl cable?
Q.02What lead time do you commit to on gmsl cable after RFQ?
+
What lead time do you commit to on gmsl cable after RFQ?
Q.03Are gmsl cable shipments duty-free into the US?
+
Are gmsl cable shipments duty-free into the US?
Q.04Do you ship gmsl cable samples for free?
+
Do you ship gmsl cable samples for free?
Q.05Can you handle the gmsl cable engineering review before we have a finalized drawing?
+
Can you handle the gmsl cable engineering review before we have a finalized drawing?
Q.06Can samples ship before tooling? (Gmsl)
+
Can samples ship before tooling? (Gmsl)
Q.07How is ITAR or EAR handled? (Gmsl)
+
How is ITAR or EAR handled? (Gmsl)
Q.08What causes most field returns? (Gmsl)
+
What causes most field returns? (Gmsl)
Q.09Do you check manufacturability first? (Gmsl)
+
Do you check manufacturability first? (Gmsl)
Q.10What sample policy applies? (Gmsl)
+
What sample policy applies? (Gmsl)
Related Builds
Industries
Capabilities
Submit RFQ
Submit your Gmsl Cable drawing.
Send the drawing, BOM, or part number plus annual volume. Engineering desk replies within 12 hours with unit price, lead time, sample plan, and Form A certificate-of-origin specimen if you need GSP filing assistance. Standards reference: UL Recognized component (https://en.wikipedia.org/wiki/UL_%28safety_organization%29), IATF 16949 (https://en.wikipedia.org/wiki/ISO/TS_16949).
Reviewed by Hommer Zhao- Cavite-based wire harness engineer at XUDONG, IPC/WHMA-A-620 Class 3 trained, 8+ years in automotive & medical harness manufacturing.
Next Step
Ready For Your Gmsl Cable Quote?
Send the drawing, BOM, or part number. We reply within 12 hours with unit price, lead time, and a sample plan. Quote returned within 12 hours. NDA on file. No obligation.