Service Index · Cavite Plant
65 Build Options.
Choose Your Assembly.
Choose a harness, finished cable assembly or component interface below. Cavite handles production for Philippine supply; Hebei Cloom in China handles samples and tooling. Match the drawing to the assembly and acceptance requirements.
Prepare a Custom Assembly Quote
Send the drawing/revision, BOM and mating part numbers, pinout, cable gauge/type and length, quantity, test requirements and Philippine delivery destination. We supply finished assemblies, not loose connectors or raw cable retail.
No MOQ (sample fee and freight extra). RFQ acknowledged the same working day (Mon–Fri); full quote and schedule follow material, tooling, test and site-transfer review. Production runs in Cavite or at Hebei Cloom in China, as the customer requires; samples and tooling are mainly at Hebei Cloom. Transit is quoted separately.
Cable Assembly
Distinct from wire harnesses by pin density and termination protocol. RF/coax, power, signal, hybrid builds.
Coaxial Cable Assembly
Choose impedance, coax type, end connectors, length and RF test limits.
ReadRF Cable Assembly
Specify frequency band, loss budget, phase requirements and connector pair.
ReadSMA Cable Assembly
Specify SMA mating interfaces, cable, length, torque and RF acceptance.
ReadBNC Cable Assembly
Confirm 50 or 75 ohm interfaces, cable type and signal test requirements.
ReadN Type Cable Assembly
Specify N-type mating parts, coax, outdoor sealing and RF acceptance.
ReadD-Sub Cable Assembly
Provide the wired pin map, contact style, backshell and shield-bond requirements.
ReadUSB Cable Assembly
Define connector orientation, data/power requirements, length and functional checks.
ReadHDMI Cable Assembly
Specify mating interfaces, length, routing and transmission acceptance scope.
ReadEthernet Cable Assembly
Confirm pair map, shielding, length, power load and transmission test scope.
ReadM12 Cable Assembly
Specify coding, pin map, cable jacket, coupling and ingress requirements.
ReadCircular Connector Cable Assembly
Provide mating pair, contact layout, cable exit and shield/retention requirements.
ReadLVDS Cable Assembly
Provide display pin map, pair routing, impedance and skew requirements.
ReadIDC Cable Assembly
Specify connector/cable pairing, pin-1 orientation and press/inspection requirements.
ReadRibbon Cable Assembly
Define conductor count, pitch, length, folds and end terminations.
ReadPower Cable Assembly
Supply load, conductor size, lug or connector details and acceptance limits.
ReadBattery Cable Assembly
Specify interconnect geometry, lugs, insulation and connection-resistance requirements.
ReadControl Cable Assembly
Map equipment I/O to pinout, cable routing and functional acceptance checks.
ReadTwinax Cable Assembly
Define pair and shield construction, impedance, skew and mating interface.
ReadSpiral Cable Assembly
Define retracted/extended length, coil geometry, terminations and flex target.
ReadShielded Cable Assembly
Specify cable/shield construction, termination and electrical/EMI test scope.
ReadWire Harness Builds
Branched, fixture-board-built harnesses. Five core build types plus 16 vertical-specific programs (EV, mining, marine, agricultural, etc.).
Custom Wire Harness
Drawing-driven custom builds, no MOQ, IPC Class 2 by default (Class 3 on request).
ReadHigh Voltage Harness
Orange-jacketed HV builds for EV battery packs and energy storage.
ReadOvermolded Harness
Single-shot TPE/PVC overmold up to 65 Shore-A; mold design and tooling at China partner Hebei Cloom.
ReadPrototype / NPI
No-MOQ samples mainly at China partner Hebei Cloom, with IPC-A-620 acceptance.
ReadWaterproof Harness
Specify mating interfaces, sealing conditions and sampled ingress acceptance.
ReadOEM Wire Harness Assembly From Customer Drawings.
Supply the released OEM drawing, BOM, revisions and acceptance plan.
ReadContract Manufacturing Assembly From Customer Drawings.
Define build scope, supplied materials, traceability and release responsibilities.
ReadEV Assembly From Customer Drawings.
Specify system ratings, HVIL where needed, mating parts and electrical acceptance.
ReadElectric Motorcycle Assembly From Customer Drawings.
Provide battery, controller and lighting pinouts, routing and sealing needs.
ReadAgricultural Assembly From Customer Drawings.
Define machine routing, sealed interfaces, vibration and outdoor conditions.
ReadMining Assembly From Customer Drawings.
Specify equipment interfaces, abrasion protection, routing and field conditions.
ReadHeavy Duty Assembly From Customer Drawings.
Define conductor loads, rugged interfaces, support points and environmental scope.
ReadMarine Assembly From Customer Drawings.
Specify moisture exposure, connector sealing, routing and corrosion-test scope.
ReadPower Tool Assembly From Customer Drawings.
Provide motor/control pinout, flexible routing and strain-relief requirements.
ReadLast Mile Assembly From Customer Drawings.
Map vehicle power and control interfaces, branch lengths and sealing needs.
ReadPtc Heater Assembly From Customer Drawings.
Specify heater load, conductor temperature, connector and insulation requirements.
ReadAutomotive Loom Assembly From Customer Drawings.
Provide vehicle pin map, branch layout, protection and submission requirements.
ReadWire Harness Drawing Review Before Quotation.
Send the drawing revision and BOM for mating, routing and process review.
ReadRush Assembly From Customer Drawings.
Identify required date, material status and approval gates for schedule review.
ReadQuotation Service Assembly From Customer Drawings.
Supply drawing, BOM, quantities, acceptance scope and delivery destination.
ReadObsolete Replacement Assembly From Customer Drawings.
Provide an old assembly or drawing, mating interfaces and alternate-approval rules.
ReadConnectors
Select the exact mating pair, terminals and wire range; tooling and qualification scope are reviewed for the program.
Circular Connector Cable Assemblies Philippines
Choose mating pair, shell size, coding, pin count and sealing requirements.
ReadD-sub Connector Cable Assemblies Philippines
Specify contact count, gender, pin map, backshell and jackscrew hardware.
ReadPCB Header Cable Assemblies Philippines
Match header, housing and terminal part numbers; confirm pitch, keying and wire gauge.
ReadFakra Connector
Specify housing code, mating part, coax type and RF acceptance requirements.
ReadMolex Connector Wire Harness Assembly
Supply the exact housing and terminal numbers, mating part and wire gauge.
ReadJST XH Connector
Confirm family, pitch, housing, terminal and compatible conductor size.
ReadDeutsch Connector Assembly
Choose DT, DTM or DTP mating parts, cavity seals and wire size.
ReadDupont Cables
Confirm housing pitch, contact gender, polarization and retention needs.
ReadPigtail Connector
Define connector, free-end preparation, wire gauge, length and sealing.
ReadRF Connector
Match interface, impedance, frequency band, cable and mating requirements.
ReadIDC Connector
Match connector pitch and pin count to cable pitch, gauge and pin-1 orientation.
ReadCable Types
Select signal or power construction, motion and environmental requirements before defining the finished assembly.
Sensor Actuator Cable Assemblies Philippines
Specify M8/M12 coding, pinout, length, jacket, shielding and washdown conditions.
ReadEdp Cable
Provide display and board mating parts, lane map, length and shielding.
ReadGmsl Cable
Specify camera/serializer interface, coax or pair construction and link-test scope.
ReadCAN Bus Cable
Define twisted-pair routing, pinout, termination and bus acceptance checks.
ReadBraided Cable
Choose braid for abrasion protection or shielding; define coverage and end treatment.
ReadVFD Cable
Specify motor load, cable length, grounding, shield termination and installation.
ReadTC-ER Power Cable
State tray routing, exposed-run conditions, conductor count and jacket requirements.
ReadHigh Flex Robot Cable
Define motion, bend radius, torsion, travel and qualification cycle target.
ReadVOD Cable Blast Detection Cable
Provide the industrial detection drawing, probe interface and field conditions.
ReadWire Looms
Choose sleeve diameter, branch exits, abrasion protection and temperature range.
ReadNext Step
Custom Assembly Not Listed Here?
Send the drawing or part number. We acknowledge your RFQ the same working day; the quotation follows within 3 working days. No obligation.