Israel · Box Build · Wired Enclosure Assembly · Cavite Manufacturing
Israel Box Build & Electromechanical Assembly
Contract box build and electromechanical assembly in Cavite, Philippines — connectorized subassemblies, control-box integration, panel & enclosure wiring, and final test — with a non-China production origin. This is electromechanical integration, not bare-board PCB fabrication or SMT; we wire, integrate, and test around a board you supply or we source through a partner. Built for Israeli electronics, medical, aerospace, and industrial OEMs that need a reliable overseas, non-China manufacturing partner for supply-chain resilience.
Immediate Proof
PH
Country of origin
Cavite Economic Zone
IATF
Process discipline
16949-aligned
1 pc
NPI MOQ
Samples on production cells
12 h
RFQ response
Engineering desk, M-F
Box Build
Electromechanical Box Build, Wired And Tested.
Box build is where harnesses, cables, connectors, and an enclosure become a finished, testable unit. The Cavite floor is built for that integration: connectorized subassemblies, control-box and enclosure wiring, panel wiring, mechanical assembly, and final functional test under one program rather than spread across separate low-volume vendors.
Because the same plant builds the harnesses and cables that go into the box, the integration is tighter: connector selection, wire routing, strain relief, and test points are decided together. IATF 16949 process discipline and IPC/WHMA-A-620 Class 3 harness acceptance carry through into the box-build inspection and final test.
Low- and mid-volume OEM programs are the sweet spot. NPI starts at one piece, and the first 12-hour RFQ reply states the assembly steps, test assumptions, lead time, and documentation path.
One Partner, Fewer Handoffs
Harness, cable, connector, enclosure, and final test under one program reduces the handoffs that slow low-volume box-build NPI and create finger-pointing at integration.
English-Speaking Engineering Desk
Israeli engineering teams work directly in English with the Cavite desk — work instructions, RFQ replies, DFM notes, and audit calls are handled in English without an extra relay layer.
Practical Lead Time To Israel
Cavite ships to Israel by air or sea freight through standard forwarders. The Asia-to-Israel timezone overlap gives same-working-day engineering review on most RFQs, and lead times are quoted realistically in the first reply.
Comparison
Multi-Vendor Box Build vs XUDONG Cavite
Box-build buyers usually struggle with handoffs: who owns the harness, who owns the enclosure, who owns the failed final test. Running it under one Cavite program removes most of that friction.
| Decision Factor | Typical local / China sourcing | XUDONG · Cavite |
|---|---|---|
| Integration ownership | Harness, enclosure, and final test split across vendors, with no single owner for integration defects. | Harness, cable, connector, enclosure wiring, and final test under one program with one owner. |
| Harness quality into the box | Sub-tier harness quality varies and is hard to trace at integration. | Harnesses built in-house to IPC/WHMA-A-620 Class 3 with traceability into the box-build record. |
| Final test | Functional test may be added late or skipped on low-volume builds. | Final functional test defined in the control plan with documented pass criteria. |
| Low-volume fit | Box-build vendors often require higher MOQs to justify line setup. | 1-piece NPI with pilot and volume tiers for low- and mid-volume OEM programs. |
| Origin & resilience for Israeli buyers | Single-source China exposure or capacity-limited local suppliers can leave a program without a documented second source. | Non-China Philippine origin with PEZA export records gives Israeli procurement a defensible dual-source / BCP option with a clear audit trail. |
Program Process
How A Program Starts
The fastest way to qualify an overseas supplier is to make the first week concrete: drawing review, engineering questions, sample plan, quality documentation, and export assumptions. That is how we structure the kickoff.
01
Send drawings, BOM, photos, or a sample
DXF, PDF, harness-board photos, connector list, annual volume, target lead time, and required documentation are enough for the first review. A mutual NDA can be signed before drawing transfer.
02
Free DFM and material review
Cavite engineering checks connector availability, crimp tooling, fixture-board need, cable jacket, test requirements, and any overmold or backshell tooling. The first reply includes NPI, pilot, and production pricing.
03
Sample on the production cell
The first article is built on the intended Cavite production cell. Cross-section photos, pull-force logs, continuity, HiPot, and dimensional checks ship with the sample.
04
Pilot lot and control-plan lock
Pilot production validates operator cycle time, fixture repeatability, connector supply, packing method, and inspection sampling. The control plan is locked only after pilot defects and customer comments are closed.
05
Production plus export package
Commercial shipments include the PEZA export record, certificate-of-origin support, invoice, packing list, and traceability records your customs broker or freight forwarder needs.
Capability Stack
Box Build Capability
Connectorized subassemblies, control-box integration, and final functional test for low- and mid-volume OEM programs, backed by in-house harness and cable capability.
Connectorized subassemblies
Sub-assemblies that combine harnesses, cables, and connectors into a testable module.
Control-box integration
Control-box and enclosure wiring, component mounting, labeling, and routing to spec.
Panel & enclosure wiring
Panel wiring, DIN-rail and terminal-block work, and cable management inside the enclosure.
Mechanical assembly
Fastening, mounting, gasketing, and mechanical integration of the wired enclosure.
Final functional test
Power-on, continuity, HiPot, insulation resistance, and customer-defined functional or fixture test, with documented pass/fail criteria in the control plan. Burn-in or firmware load is run only where the customer specifies and supplies the procedure.
Documentation & packing
Control plans, FAI, traceability, and packing / logistics support for the finished unit.
Facility
Built In Cavite, Not Re-Labeled In Cavite.
XUDONG's Cavite operation in the Philippines handles wire harness assembly, cable assembly, box build, test, inspection, packing, and export processing inside the Cavite Economic Zone. Programs are not transshipped — the production record, operator record, inspection record, and export record all point to the same plant.
For overseas buyers that matters more than a brochure: when a customer auditor or internal compliance team asks where the work is performed, the answer is a program file showing the production cell, the materials that entered the line, the operators who ran the cell, and the export documents that accompanied the shipment.
Certifications & Records
Audit Pack Before Production.
The certificate list is only the front page. For active programs, the real audit pack includes control plans, calibration records, operator training, material declarations, inspection logs, and origin-support documentation tied to the shipment.
CERT.01
IATF 16949
Automotive-grade process control with APQP / PPAP discipline and structured corrective action.
CERT.02
ISO 9001:2015
Documented quality management system with annual audit discipline.
CERT.03
ISO 13485
Medical-device quality documentation path for regulated electronics and cable assemblies.
CERT.04
IPC/WHMA-A-620
Class 3 cable and wire harness acceptance as the default inspection baseline; operators trained to the standard.
CERT.05
RoHS / REACH
BOM-line material compliance declarations available for customer audit packs.
CERT.06
PEZA Export Records
Cavite Economic Zone export documentation used in the origin and customs-support package.
Related Pages
Keep The Search Intent Connected.
Wire Harness
In-house harness capability feeding box-build integration.
Cable Assembly
Cable assemblies and overmolds built for the same box-build programs.
Connectors
Connector families and sourcing traceability used across box-build subassemblies.
China+1 Sourcing
Non-China origin for box-build supply-chain diversification and BCP.
FAQ
Procurement Questions, Answered.
Q.01What does your box build service cover?
+
What does your box build service cover?
Q.02Do you handle low-volume box-build programs?
+
Do you handle low-volume box-build programs?
Q.03Does box build include PCB fabrication or SMT?
+
Does box build include PCB fabrication or SMT?
Q.04Do you support Israeli OEMs in English?
+
Do you support Israeli OEMs in English?
Q.05Can you ship to Israel and document non-China origin?
+
Can you ship to Israel and document non-China origin?
Submit RFQ
Send The Box Build Spec.
Attach the assembly drawing, wiring diagram, BOM, enclosure detail, and annual volume. We reply within 12 working hours with price tiers, sample timing, test assumptions, and the documentation path.
Next Step
Send The Box Build Spec.
Send the drawing, BOM, or current supplier package. Quote returned within 12 hours. NDA on file. No obligation.