Israel · RF / Coax · Power Cable · Cavite Manufacturing
Israel Specialty Cable Assemblies
Specialty cable assemblies from Cavite, Philippines — power cable assemblies built and continuity-tested in Cavite; RF / coax assemblies quoted per cable and connector part number, with Cavite termination confirmed at quotation. Non-China production origin. Built for Israeli electronics, robotics, and industrial OEMs that need a reliable overseas, non-China manufacturing partner for supply-chain resilience.
Sample fee & freight extra; built at Hebei Cloom, China
Same day
RFQ acknowledgement
Quote within 3 working days
Specialty Cable
Specialty Cable Assemblies: Cavite Equipment, Tests And What Is Confirmed At Quotation.
Power cable assemblies depend on lug crimp integrity and insulation; RF and coax assemblies depend on correct connector seating, which is why their termination is confirmed per part number. The Cavite plant's general equipment includes 4 wire cutters (±0.2 mm), one Easy360S automatic crimper with crimp-force monitoring, 10 semi-automatic presses, 4 hand-soldering stations and one tunnel heat-shrink machine.
Every assembly is 100% continuity-tested on a QJ100-256 tester, and crimp pull force (TSD-010) and cross-sections (TSA-001) are checked per the approved sampling plan. Cavite has no VNA, so if your drawing specifies VSWR, insertion-loss or impedance acceptance, the test method, who runs it and the report format are confirmed at quotation before we accept the order. HiPot, where the drawing requires it, is also done at Hebei Cloom.
Connectors and contacts are sourced to the approved BOM. There is no MOQ (sample fee and freight extra); samples are built at Hebei Cloom, China in about 15 days (30 for complex builds), and the quotation states which tests run in Cavite and which go to Hebei Cloom or an outside lab.
Test Plan Agreed Before The Build
Continuity, pull force and cross-section are checked in Cavite; HiPot is done at Hebei Cloom. Whether RF acceptance can be arranged, who runs it and the report format are confirmed at quotation.
English-Speaking Engineering Desk
Israeli engineering teams work directly in English with the Cavite desk — work instructions, RFQ replies, drawing questions, and audit calls are handled in English without an extra relay layer.
Practical Lead Time To Israel
Cavite ships to Israel by air or sea freight through standard forwarders. The Asia-to-Israel timezone overlap helps us acknowledge RFQs the same working day; lead times are stated in the quotation, which follows within 3 working days.
Comparison
Specialty Cable Supplier Checklist
Specialty cable buyers need to know which steps a supplier does on site and which go to a partner or lab — before the first sample.
RF / coax termination
Ask each supplier
Which RF tests are offered, and who runs them?
XUDONG · Cavite
Whether Cavite can terminate the cable and connector combination is confirmed per part number at quotation; finished assemblies are 100% continuity-tested, and any VSWR / insertion-loss acceptance is agreed separately (no VNA in Cavite).
Power cable integrity
Ask each supplier
Are lug crimps pull-tested and cross-sectioned?
XUDONG · Cavite
Lug crimps pull-tested (TSD-010) and cross-sectioned (TSA-001) per the approved sampling plan; HiPot at Hebei Cloom where required.
Test transparency
Ask each supplier
Where does each test run?
XUDONG · Cavite
The quotation lists each confirmed test and where it runs.
Records
Ask each supplier
How long are inspection records kept?
XUDONG · Cavite
Inspection records kept for 3 years; lots sampled to AQL S-2.
Origin & resilience for Israeli buyers
Ask each supplier
If one source or country is disrupted, is a documented second source available?
XUDONG · Cavite
Philippine production with PEZA export records gives Israeli procurement a documented second-source option.
Decision Factor
Ask each supplier
XUDONG · Cavite
RF / coax termination
Which RF tests are offered, and who runs them?
Whether Cavite can terminate the cable and connector combination is confirmed per part number at quotation; finished assemblies are 100% continuity-tested, and any VSWR / insertion-loss acceptance is agreed separately (no VNA in Cavite).
Power cable integrity
Are lug crimps pull-tested and cross-sectioned?
Lug crimps pull-tested (TSD-010) and cross-sectioned (TSA-001) per the approved sampling plan; HiPot at Hebei Cloom where required.
Test transparency
Where does each test run?
The quotation lists each confirmed test and where it runs.
Records
How long are inspection records kept?
Inspection records kept for 3 years; lots sampled to AQL S-2.
Origin & resilience for Israeli buyers
If one source or country is disrupted, is a documented second source available?
Philippine production with PEZA export records gives Israeli procurement a documented second-source option.
Program Process
How A Program Starts
The fastest way to qualify an overseas supplier is to make the first week concrete: drawing review, engineering questions, sample plan, quality documentation, and export assumptions. That is how we structure the kickoff.
01
Send drawings, BOM, photos, or a sample
DXF, PDF, harness-board photos, connector list, annual volume, target lead time, and required documentation are enough for the first review. We can sign your NDA template before drawings are shared; it is not required for an initial review.
02
Engineering and material review
Cavite engineering checks connector availability, crimp tooling, fixture-board need, cable jacket, test requirements, and any overmold or backshell tooling. We acknowledge the RFQ the same working day; the quotation, with any drawing questions, follows within 3 working days. The quotation includes NPI, pilot, and production pricing.
03
Sample at China partner Hebei Cloom
Samples typically take 15 days (30 for complex builds) at Hebei Cloom, China, and carry China origin. Which inspection records ship with the sample (for example pull-force, cross-section or continuity results) is agreed in the quotation.
04
Sample approval, then production
Production starts after the customer approves the sample. Any later drawing or material change goes through the ECN change process, and lots are sampled to AQL S-2.
05
Production plus export package
The export paperwork for each shipment (for example the PEZA export record, commercial invoice and packing list) is listed in the quotation. Inspection records are kept for 3 years.
Capability Stack
Specialty Cable Capability
Power cable assemblies built in Cavite; RF / coax assessed per part number. The tests each one needs are agreed at quotation.
RF & coax assemblies
Coax and RF assemblies quoted against your cable and connector part numbers; whether Cavite can terminate them is confirmed per part at quotation. 100% continuity testing in Cavite; no VNA, so any VSWR / insertion-loss acceptance is agreed separately.
Power cable assemblies
Lug- and ring-terminated power and battery cables, wire from 30 AWG to 120 mm², with crimp pull and cross-section checks; HiPot at Hebei Cloom where required.
Shielded & hybrid
Shielded and hybrid power-plus-signal assemblies built to the approved drawing, up to 128 circuits and from 15 mm to 50 m long.
Test & inspection
100% continuity on a QJ100-256 tester, pull force (TSD-010) and cross-section (TSA-001) per the approved sampling plan, AQL S-2 sampling.
Environmental tests
IP-rating, salt-spray and other environmental tests run by third-party labs when the drawing calls for them.
Documents
RoHS and REACH declarations on request; sample-level PPAP and first-article inspection (FAI); inspection records kept for 3 years.
Facility
Production Locations And Program Records
Wire harnesses and cable assemblies are built in Cavite, Philippines, or in China, wherever the customer requires; our China partner factory, Hebei Cloom, runs its own wire harness line and performs box build and enclosure integration, with XUDONG coordinating the program. Samples and custom prototypes are mainly built at our China partner factory, Hebei Cloom; volume production runs in Cavite or at Hebei Cloom, as the customer requires. Samples built in China are China-origin.
For overseas buyers that matters more than a brochure: when a customer auditor or internal compliance team asks where the work is performed, Cavite can show its inspection and test records, which are kept for 3 years. There is no full traceability system linking operators and material lots to each unit; any extra record fields and the export documents for each shipment are confirmed in the quotation.
Certifications & Records
Certificates, Inspection Records And Audit Pack.
The certificate list is only the front page. For active programs, the audit pack covers the agreed inspection plan, inspection records (kept for 3 years), RoHS/REACH declarations, and sample-level PPAP/FAI on request.
CERT.01
ISO 9001:2015
Held by China manufacturing partner Hebei Cloom; the Cavite plant is not separately ISO 9001 certified.
CERT.02
IPC/WHMA-A-620
Cable and wire harness acceptance criteria as the inspection baseline; Class 2 by default, Class 3 acceptance applied where the program specifies it.
CERT.03
RoHS / REACH
BOM-line material compliance declarations available for customer audit packs.
CERT.04
PEZA Export Records
Cavite Economic Zone export records that travel with each export shipment's customs paperwork.
Can you build RF / coax cable assemblies in Cavite?
+
Send the cable and connector part numbers. Whether Cavite can terminate that combination is confirmed in the quotation; finished assemblies get 100% continuity testing on the QJ100-256 tester. Cavite has no VNA, so whether VSWR / insertion-loss acceptance can be arranged, who runs it and the report format are also confirmed at quotation.
Q.02
Which tests run in Cavite and which go to a partner or lab?
+
Continuity (100%, QJ100-256), crimp pull force (TSD-010) and cross-section (TSA-001) run in Cavite. HiPot runs at Hebei Cloom, China. Cavite has no VNA, so any VSWR / insertion-loss or impedance requirement is confirmed at quotation (method, who runs it, report); IP-rating and salt-spray tests go to third-party labs. The quotation states exactly which applies to your spec.
Q.03
Do you HiPot-test power cable assemblies?
+
Not in Cavite. Where the drawing requires HiPot testing, it is done at Hebei Cloom, China (insulation-resistance testing is confirmed at quotation), and the quotation states the route. Lug crimps are pull-tested and cross-sectioned in Cavite per the approved sampling plan.
Q.04
Do you support Israeli OEMs in English?
+
Yes. Our Cavite engineering and sales desk works in English. Israeli engineering, quality, and procurement teams communicate directly with the people running the program — drawings, drawing questions, inspection records, and audit calls are all handled in English.
Q.05
Can you ship to Israel?
+
Yes. We ship from the Cavite Economic Zone to Israel through standard air and sea forwarders, and provide the PEZA export record, commercial invoice, and packing list.
Submit RFQ
Send The Specialty Cable Spec.
Attach the cable spec, connector list, performance requirement, and annual volume. We acknowledge the RFQ the same working day (Mon–Fri) and send the quotation within 3 working days.
We acknowledge your RFQ the same working day (Mon–Fri); the quotation follows within 3 working days.
Send the drawing, BOM, quantity and delivery location for a sample and production plan.
We can sign your own NDA template before drawings are shared; it is not required for an initial review.