Israel · Custom Wire Harness · Contract Manufacturing
Israel Wire Harness Manufacturer
Custom and OEM wire harness manufacturing in Cavite, Philippines — contract and low-volume, for industrial, medical, and aerospace OEMs — with fixture-board production, Class 3 inspection, and a non-China origin. Built for Israeli electronics, medical, aerospace, and industrial OEMs that need a reliable overseas, non-China manufacturing partner for supply-chain resilience.
Immediate Proof
PH
Country of origin
Cavite Economic Zone
Class 3
IPC-A-620 baseline
Operator workmanship
1 pc
NPI MOQ
Samples on production cells
12 h
RFQ response
Engineering desk, M-F
Wire Harness
Custom Wire Harness, Contract & Low Volume.
Custom and OEM wire harnesses live or die on the board: lay-on routing, breakout dressing, branch geometry, taping cadence, and per-leg labeling. We build harnesses on fixture boards that mirror the production intent, so the sample is representative of the volume run rather than a hand-made one-off.
Contract and low-volume programs are the core of the Cavite floor. Industrial, medical, and aerospace OEMs use it for harnesses where IPC/WHMA-A-620 Class 3 acceptance, IATF 16949 process discipline, and documented test gates matter more than the lowest unit price. PPAP, FAI, control plans, and DMR/DHR support are available where the program requires them.
There is no minimum-order wall in front of the first article. NPI starts at one piece on the intended production cell, and the first 12-hour RFQ reply states the real lead time, connector alternates, and documentation path.
Standards-Led Inspection
IPC/WHMA-A-620 Class 3 by default, with crimp cross-section, pull-force logging, continuity, and HiPot gates appropriate to the harness application.
English-Speaking Engineering Desk
Israeli engineering teams work directly in English with the Cavite desk — work instructions, RFQ replies, DFM notes, and audit calls are handled in English without an extra relay layer.
Practical Lead Time To Israel
Cavite ships to Israel by air or sea freight through standard forwarders. The Asia-to-Israel timezone overlap gives same-working-day engineering review on most RFQs, and lead times are quoted realistically in the first reply.
Comparison
Generic Harness Sourcing vs XUDONG Cavite
Buyers evaluating a contract harness manufacturer want to know the program will be run to a standard and that low volume will not be an afterthought. This comparison reflects the decision we hear most often.
| Decision Factor | Typical local / China sourcing | XUDONG · Cavite |
|---|---|---|
| Build method | Hand-built samples away from the line, then reworked for production. | Samples built on fixture boards that mirror the intended production cell. |
| Quality baseline | ISO claim may not map to IPC-A-620 harness acceptance or PPAP deliverables. | IATF 16949 discipline, IPC/WHMA-A-620 Class 3 baseline, PPAP, FAI, and control-plan support. |
| Low-volume / contract fit | Prototype-friendly in sales copy, but cells push higher MOQs. | 1-piece NPI, pilot lots, and volume tiers structured for contract and low-volume work. |
| Documentation | Limited records shipped; traceability assembled on request. | FAI, control plans, material declarations, and DMR/DHR support prepared as part of the program file. |
| Origin & resilience for Israeli buyers | Single-source China exposure or capacity-limited local suppliers can leave a program without a documented second source. | Non-China Philippine origin with PEZA export records gives Israeli procurement a defensible dual-source / BCP option with a clear audit trail. |
Program Process
How A Program Starts
The fastest way to qualify an overseas supplier is to make the first week concrete: drawing review, engineering questions, sample plan, quality documentation, and export assumptions. That is how we structure the kickoff.
01
Send drawings, BOM, photos, or a sample
DXF, PDF, harness-board photos, connector list, annual volume, target lead time, and required documentation are enough for the first review. A mutual NDA can be signed before drawing transfer.
02
Free DFM and material review
Cavite engineering checks connector availability, crimp tooling, fixture-board need, cable jacket, test requirements, and any overmold or backshell tooling. The first reply includes NPI, pilot, and production pricing.
03
Sample on the production cell
The first article is built on the intended Cavite production cell. Cross-section photos, pull-force logs, continuity, HiPot, and dimensional checks ship with the sample.
04
Pilot lot and control-plan lock
Pilot production validates operator cycle time, fixture repeatability, connector supply, packing method, and inspection sampling. The control plan is locked only after pilot defects and customer comments are closed.
05
Production plus export package
Commercial shipments include the PEZA export record, certificate-of-origin support, invoice, packing list, and traceability records your customs broker or freight forwarder needs.
Capability Stack
Wire Harness Capability
Fixture-board production, branched assemblies, and documented inspection for industrial, medical, aerospace, and adjacent OEM harness programs.
Custom & branched harnesses
Fixture-board routing, branched assemblies, per-leg labeling, conduit, braided sleeve, and taped breakouts.
Waterproof & sealed harnesses
Sealed connectors, grommets, and IP-rated exits for industrial and outdoor applications.
High-voltage & shielded
High-voltage orange cable, shielded and twisted-pair routing, and EMI-aware dress.
Industry programs
Industrial, medical, aerospace, robotics, and energy harnesses built to the applicable acceptance class.
Quality documentation
PPAP, FAI, control plans, FMEA, MSA, DMR/DHR support, and IPC/WHMA-A-620 Class 3 inspection.
Test & inspection
Continuity, open/short, HiPot, insulation resistance, crimp cross-section, and pull force.
Facility
Built In Cavite, Not Re-Labeled In Cavite.
XUDONG's Cavite operation in the Philippines handles wire harness assembly, cable assembly, box build, test, inspection, packing, and export processing inside the Cavite Economic Zone. Programs are not transshipped — the production record, operator record, inspection record, and export record all point to the same plant.
For overseas buyers that matters more than a brochure: when a customer auditor or internal compliance team asks where the work is performed, the answer is a program file showing the production cell, the materials that entered the line, the operators who ran the cell, and the export documents that accompanied the shipment.
Certifications & Records
Audit Pack Before Production.
The certificate list is only the front page. For active programs, the real audit pack includes control plans, calibration records, operator training, material declarations, inspection logs, and origin-support documentation tied to the shipment.
CERT.01
IATF 16949
Automotive-grade process control with APQP / PPAP discipline and structured corrective action.
CERT.02
ISO 9001:2015
Documented quality management system with annual audit discipline.
CERT.03
ISO 13485
Medical-device quality documentation path for regulated electronics and cable assemblies.
CERT.04
IPC/WHMA-A-620
Class 3 cable and wire harness acceptance as the default inspection baseline; operators trained to the standard.
CERT.05
RoHS / REACH
BOM-line material compliance declarations available for customer audit packs.
CERT.06
PEZA Export Records
Cavite Economic Zone export documentation used in the origin and customs-support package.
Related Pages
Keep The Search Intent Connected.
Wire Harness
Branched harness capability, fixture-board production, PPAP, and Class 3 inspection by build type and industry.
Cable Assembly
Coax, power, signal, Ethernet, shielded, robot-flex, and hybrid cable assemblies built in Cavite.
Box Build
Connectorized subassemblies, control-box integration, panel wiring, and final test for OEM programs.
China+1 Sourcing
Non-China origin program for supply-chain diversification, dual sourcing, and BCP resilience.
FAQ
Procurement Questions, Answered.
Q.01Do you take on contract and low-volume harness programs?
+
Do you take on contract and low-volume harness programs?
Q.02Which industries do you build harnesses for?
+
Which industries do you build harnesses for?
Q.03Do you support Israeli OEMs in English?
+
Do you support Israeli OEMs in English?
Q.04Can you ship to Israel and document non-China origin?
+
Can you ship to Israel and document non-China origin?
Submit RFQ
Send The Wire Harness Drawing.
Attach the harness drawing or board photo, connector list, BOM, and annual volume. We reply within 12 working hours with price tiers, sample timing, DFM notes, and the documentation path for a non-China-origin shipment.
Next Step
Send The Wire Harness Drawing.
Send the drawing, BOM, or current supplier package. Quote returned within 12 hours. NDA on file. No obligation.