Korea · Custom Cable Assembly · Cavite Manufacturing
Korea Cable Assembly Manufacturer
Custom and OEM cable assemblies built in Cavite, Philippines — USB-C, M12, LVDS, coax, power, and signal — with IPC/WHMA-A-620 Class 2 acceptance (Class 3 on request). Overmolded versions are molded at partner Hebei Cloom, China. Built for Korean electronics, EV / battery, and industrial OEMs running a China+1 / BCP strategy that need a non-China production origin and disciplined quality.
Sample fee & freight extra; built at Hebei Cloom, China
Same day
RFQ acknowledgement
Quote within 3 working days
Cable Assembly
Custom Cable Assembly Built To The Drawing.
A cable assembly is only as good as the crimp, the strain relief, and the test plan behind it. We build custom and OEM cable assemblies to your drawing — overmolded USB-C, M12 sensor cables, LVDS and display cables, coax and RF, power, and multi-conductor signal harnesses — on production cells that hold the same crimp tooling and inspection gates used for the volume run.
Available where specified by the program: each build runs against IPC/WHMA-A-620 Class 2 acceptance by default, Class 3 on request, with terminal-matched applicators, cross-section verification, pull tests, and continuity test (HiPot at Hebei Cloom, China) where the application calls for it. Connectors are sourced to the approved BOM, so the assembly that ships is the assembly that was qualified.
For low-volume and OEM programs there is no minimum-order wall in front of the sample: there is no MOQ for NPI samples, which are built at China partner Hebei Cloom, and the quotation spells out the real lead time, open drawing questions, and documentation path.
Overmold & Connector Depth
Custom strain reliefs, boots, backshells, and sealed exits through mold design and tooling at China partner Hebei Cloom, plus connector sourcing to the approved BOM for USB-C, M12, LVDS, coax, and circular programs.
English Support For Korean Programs
Korean engineering and procurement teams can work with us in English, Chinese or Japanese, from drawing questions through inspection records and audits. We do not claim a local Korea office or Korean-language staff.
Lead Time & Logistics To Korea
Cavite ships to Korea by air and sea freight on regular Asia routes, with short transit relative to longer-haul origins. RFQs are acknowledged the same working day (Mon–Fri) and quoted within 3 working days.
Comparison
Cable Assembly Supplier Checklist
The buyer question for cable assemblies is usually about crimp quality, test evidence, and whether a low-volume program will be treated seriously. Use these questions to compare quotations.
Crimp & inspection baseline
Ask each supplier
Is the workmanship class stated in the quotation?
XUDONG · Cavite
IPC/WHMA-A-620 Class 2 acceptance by default (Class 3 on request), terminal-matched applicators and sampled cross-section checks (TSA-001).
Test evidence
Ask each supplier
Which tests run, where, and which records ship to you?
XUDONG · Cavite
Which records ship with the sample (for example continuity, pull-force or HiPot from Hebei Cloom, China) is agreed in the quotation.
Connector sourcing
Ask each supplier
Are connectors sourced to your approved BOM, and are substitutions documented?
XUDONG · Cavite
Connector sourcing to the approved BOM for USB-C, M12, LVDS, coax, and circular families.
Low-volume support
Ask each supplier
Is there an MOQ for samples and pilot lots?
XUDONG · Cavite
No MOQ (sample fee and freight extra); samples at China partner Hebei Cloom in 15 days (30 if complex).
China+1 / BCP fit for Korean buyers
Ask each supplier
If one country of origin is disrupted, is a documented second source available?
XUDONG · Cavite
Philippine-origin production gives Korean teams a documented second source for business-continuity planning, with PEZA export records and inspection records kept for 3 years.
Decision Factor
Ask each supplier
XUDONG · Cavite
Crimp & inspection baseline
Is the workmanship class stated in the quotation?
IPC/WHMA-A-620 Class 2 acceptance by default (Class 3 on request), terminal-matched applicators and sampled cross-section checks (TSA-001).
Test evidence
Which tests run, where, and which records ship to you?
Which records ship with the sample (for example continuity, pull-force or HiPot from Hebei Cloom, China) is agreed in the quotation.
Connector sourcing
Are connectors sourced to your approved BOM, and are substitutions documented?
Connector sourcing to the approved BOM for USB-C, M12, LVDS, coax, and circular families.
Low-volume support
Is there an MOQ for samples and pilot lots?
No MOQ (sample fee and freight extra); samples at China partner Hebei Cloom in 15 days (30 if complex).
China+1 / BCP fit for Korean buyers
If one country of origin is disrupted, is a documented second source available?
Philippine-origin production gives Korean teams a documented second source for business-continuity planning, with PEZA export records and inspection records kept for 3 years.
Program Process
How A Program Starts
The fastest way to qualify an overseas supplier is to make the first week concrete: drawing review, engineering questions, sample plan, quality documentation, and export assumptions. That is how we structure the kickoff.
01
Send drawings, BOM, photos, or a sample
DXF, PDF, harness-board photos, connector list, annual volume, target lead time, and required documentation are enough for the first review. We can sign your NDA template before drawings are shared; it is not required for an initial review.
02
Engineering and material review
Cavite engineering checks connector availability, crimp tooling, fixture-board need, cable jacket, test requirements, and any overmold or backshell tooling. We acknowledge the RFQ the same working day; the quotation, with any drawing questions, follows within 3 working days. The quotation includes NPI, pilot, and production pricing.
03
Sample at China partner Hebei Cloom
Samples typically take 15 days (30 for complex builds) at Hebei Cloom, China, and carry China origin. Which inspection records ship with the sample (for example pull-force, cross-section or continuity results) is agreed in the quotation.
04
Sample approval, then production
Production starts after the customer approves the sample. Any later drawing or material change goes through the ECN change process, and lots are sampled to AQL S-2.
05
Production plus export package
The export paperwork for each shipment (for example the PEZA export record, commercial invoice and packing list) is listed in the quotation. Inspection records are kept for 3 years.
Capability Stack
Cable Assembly Capability
The Cavite floor runs the equipment, operators, and quality records needed to take cable-assembly programs from drawing to qualified production without resetting the engineering standard.
Overmolded assemblies
Custom strain reliefs, boots, backshells, and sealed exits via mold design and tooling at China partner Hebei Cloom, including USB-C and circular overmolds.
Coax / RF assemblies
Coax, microwave, and RF cable assemblies with controlled-impedance connectors and continuity / VSWR-aware test plans where specified.
M12 / LVDS / display cables
M12 sensor and industrial cables, LVDS and display cables, and shielded signal assemblies with per-leg labeling.
Power & signal cables
Power, battery, and multi-conductor signal assemblies with crimp, solder-cup, and IDC termination options.
Test & inspection
100% continuity/open-short (QJ100-256), crimp cross-section and pull-force checks in Cavite; HiPot at Hebei Cloom, China where specified.
Documentation
FAI and RoHS / REACH declarations as agreed in the quotation; inspection records kept 3 years.
Facility
What Cavite Builds And What Hebei Cloom Supports.
Samples and custom prototypes are mainly built at our China partner factory, Hebei Cloom; volume production runs in Cavite or at Hebei Cloom, as the customer requires. Samples built in China are China-origin. Molds are designed and built, including T1 samples, at our China partner factory, Hebei Cloom. Production location is confirmed in the quote.
For a transfer program that balance is the point: close enough to the Asian tooling and connector network to retain engineering leverage, but with a real non-China production origin and an English-speaking interface for overseas buyers.
Certifications & Records
Certificates, Inspection Records And Audit Pack.
The certificate list is only the front page. For active programs, the audit pack covers the agreed inspection plan, inspection records (kept for 3 years), RoHS/REACH declarations, and sample-level PPAP/FAI on request.
CERT.01
ISO 9001:2015
Held by China manufacturing partner Hebei Cloom; the Cavite plant is not separately ISO 9001 certified.
CERT.02
IPC/WHMA-A-620
Cable and wire harness acceptance criteria as the inspection baseline; Class 2 by default, Class 3 acceptance applied where the program specifies it.
CERT.03
RoHS / REACH
BOM-line material compliance declarations available for customer audit packs.
CERT.04
PEZA Export Records
Cavite Economic Zone export records that travel with each export shipment's customs paperwork.
Can you build overmolded USB-C, M12, and LVDS cable assemblies?
+
Yes. We build overmolded USB-C, M12 sensor cables, LVDS / display cables, coax, power, and multi-conductor signal assemblies. Overmold tooling is handled through mold design and tooling at China partner Hebei Cloom, and connectors are sourced to the part numbers on your BOM. Inspection records are kept for 3 years; there is no full lot-to-serial traceability system.
Q.02
What is the MOQ for a cable assembly?
+
there is no MOQ for NPI samples, which are built at China partner Hebei Cloom. Production pricing is tiered by pilot and volume so you can qualify the assembly before committing to a large run; we acknowledge the RFQ the same working day (Mon–Fri) and send the quotation within 3 working days.
Q.03
How does this fit a Korean China+1 / BCP strategy?
+
The Cavite plant gives Korean manufacturers a non-China production origin that can serve as a second source for business-continuity planning. Cavite programs run with IPC/WHMA-A-620 Class 2 inspection (Class 3 on request); IATF 16949 is held by partner Hebei Cloom, not Cavite. RoHS/REACH declarations can be supplied. We provide PEZA export records, commercial invoices, and packing lists.
Q.04
Do you have a Korea office or Korean-language support?
+
We support Korean customers in English, Chinese or Japanese and do not claim a local Korea office. Program communication, from drawing questions to inspection records, can run in any of these three languages; we do not offer Korean-language support.
Submit RFQ
Send The Cable Assembly Drawing.
Attach the drawing, connector list, BOM, and annual volume. We acknowledge the RFQ the same working day (Mon–Fri) and send the quotation within 3 working days.
We acknowledge your RFQ the same working day (Mon–Fri); the quotation follows within 3 working days.
Send the drawing, BOM, quantity and delivery location for a sample and production plan.
We can sign your own NDA template before drawings are shared; it is not required for an initial review.