Engineering Blog
FROM THE
CAVITE FLOOR.
SIGNAL, NOT NOISE.
Tariff math, IPC/WHMA-A-620 Class 3 reality checks, AWG selection decision trees, DFM checklists, and supply-chain forecasts — written by the team supporting Cavite production and Hebei Cloom engineering and manufacturing cases; case locations and reference sources are identified in the articles.
27
Articles Published
4
Topic Categories
Quality
2 Articles
Sorted Newest First
Wire Harness Testing Methods: Continuity, HiPot, and Pull Force
The three test families that prove a harness is built right: continuity for the wiring, HiPot and insulation resistance for the dielectric, and crimp pull force for the joints. What each catches, which run on every unit, and what to put in a test plan.
IPC/WHMA-A-620 Classes Explained: What to Specify and How to Verify
What IPC/WHMA-A-620 and its three classes mean, who chooses the class, what the standard covers, how people (not products) are certified, and how to check a supplier builds to the class you specified.
Editorial Standard
Wire Harness Articles
with Cited
Sources.
Every article on this blog is written to cite its sources. A figure either links to a standard, regulation or manufacturer publication, or it is labeled as an assumed number used to illustrate a method. Where we could not source a claim we removed it. We do not publish vendor-sponsored content.
If you find a number that is wrong or stale, write to the engineering desk and we will publish a correction with date stamp.
Next Step
Request a Wire Harness Quote.
Send a drawing or BOM and the engineering desk acknowledges the same working day (Mon–Fri) and sends a quotation within 3 working days. No obligation.

