Workmanship acceptance
- Ask each supplier
- Which IPC/WHMA-A-620 class and drawing revision will govern acceptance?
- XUDONG program scope
- Workmanship follows IPC/WHMA-A-620 at the class specified on the drawing.
Routing
Cavite · Philippines
Custom power and signal cable assemblies built in our Cavite plant (overmolded parts from partner Hebei Cloom, China), with domestic delivery. Customs and tax treatment confirmed per transaction under PEZA rules.
Philippines Feasibility Review
We acknowledge your RFQ the same working day (Mon–Fri); the quotation follows within 3 working days.
PH
Country of origin
Cavite Economic Zone
Class 2
IPC-A-620 baseline
Class 3 on request
No MOQ
NPI samples
Sample fee & freight extra; built at Hebei Cloom, China
Same day
RFQ acknowledgement
Quote within 3 working days
Cable Assembly
XUDONG builds custom and OEM cable assemblies to your drawing: overmolded USB-C, M12 sensor cables, LVDS and display cables, coax and RF, power, and multi-conductor signal harnesses for industrial and robotics equipment.
Drawing review establishes the workmanship class, electrical test plan and required records. Include any crimp cross-sections, pull-force checks and dimensional inspection in the agreed plan.
there is no MOQ for NPI samples, which are built at China partner Hebei Cloom. Sample timing, order quantities and price tiers, material availability and delivery dates are confirmed after drawing review.
Custom strain reliefs, boots, backshells, and sealed exits through mold design and tooling at China partner Hebei Cloom, plus connector sourcing to the approved BOM for USB-C, M12, LVDS, coax, and circular programs.
Philippine OEMs work with our Cavite engineering desk in English on drawings, drawing questions and agreed inspection records. On-site audit arrangements are confirmed with the team.
Domestic delivery is available from the Cavite plant; customs and tax treatment are confirmed per transaction under PEZA rules.
PEZA IRR, Rule VIII, Section 5 (Domestic Sale); retrieved 2026-10-30. Domestic sales are subject to applicable duties, taxes and conditions.
Comparison
Use these questions to compare quotations on the same drawing revision, test scope and delivery basis.
| Decision Factor | Ask each supplier | XUDONG program scope |
|---|---|---|
| Workmanship acceptance | Which IPC/WHMA-A-620 class and drawing revision will govern acceptance? | Workmanship follows IPC/WHMA-A-620 at the class specified on the drawing. |
| Electrical tests and records | Which tests, limits and record formats are included in the quotation? | 100% continuity is tested in Cavite; HiPot, where specified, is done at Hebei Cloom, China. Other tests and the records supplied are agreed in the quotation. |
| Connector sourcing | Are connector part numbers, sourcing channels and substitutions documented? | Connector sourcing to the approved BOM; engineering reviews availability and any proposed alternatives before approval. |
| Sample approval and order quantity | Where are samples built, and when are sample timing and production quantities confirmed? | NPI starts at one piece, mainly at Hebei Cloom in China. Sample approval, order quantity and schedule are agreed after drawing review. |
| Philippine delivery | What delivery location, customs handling and applicable charges does the quote include? | Domestic delivery is available from the Cavite plant; customs and tax treatment are confirmed per transaction under PEZA rules. |
Program Process
Agree the drawing revision, sample approval criteria, production quantity, inspection plan and Philippine delivery requirements before releasing the build.
01
DXF, PDF, harness-board photos, connector list, annual volume, target lead time, and required documentation are enough for the first review. We can sign your NDA template before drawings are shared; it is not required for an initial review.
02
Cavite engineering checks connector availability, crimp tooling, fixture-board need, cable jacket, test requirements, and any overmold or backshell tooling. We acknowledge the RFQ the same working day; the quotation, with any drawing questions, follows within 3 working days. The quotation includes NPI, pilot, and production pricing.
03
Samples and custom prototypes are mainly built at Hebei Cloom in China and are China-origin. Agree sample timing, acceptance criteria and required inspection records before the build.
04
Production starts after the customer approves the sample. Any later drawing or material change goes through the ECN change process, and lots are sampled to AQL S-2.
05
Confirm order quantity, schedule, Philippine delivery address, shipment records and transaction-specific customs and tax treatment in the quote. Export documentation applies separately to export orders.
Capability Stack
Use the selection checks below to define your drawing and BOM. Engineering confirms materials, terminations, tooling and inspection scope for the specific build; no universal current, wire-gauge or environmental rating is implied.
Custom strain reliefs, boots, backshells, and sealed exits via mold design and tooling at China partner Hebei Cloom, including USB-C and circular overmolds.
Coax, microwave, and RF cable assemblies with controlled-impedance connectors and continuity / VSWR-aware test plans where specified.
M12 sensor and industrial cables, LVDS and display cables, and shielded signal assemblies with per-leg labeling.
Specify crimp, solder-cup or IDC termination by connector part number. Match conductor size, stranding and insulation diameter to the terminal specification; confirm compatible tooling and strain relief during drawing review.
State the IPC/WHMA-A-620 class, circuits, test limits and sampling on the drawing. Electrical tests and records follow the agreed plan; see the power-assembly acceptance section below.
First article inspection (FAI), RoHS / REACH declarations and inspection records (kept 3 years) are supplied as agreed in the quotation.
Name the required insulation and jacket material or cable part number. State temperature, fluid exposure, bend radius, fixed or repeated-flex routing, pull loads and sealing needs. Check the cable datasheet against these conditions and specify validation for the finished assembly.
Specify foil, braid or a combined shield where required by the equipment design. Show drain-wire connections, shield continuity and connector or chassis termination on the drawing. Agree any shielding validation separately; a shielded cable alone does not establish assembly EMC performance.
XUDONG builds AC, DC, and battery power cable assemblies to your drawing in Cavite. Identify the equipment application and provide electrical, mechanical, and destination-market requirements for engineering review.
Equipment mains leads with buyer-specified plugs, appliance connectors, or terminals. State the destination market, equipment nameplate rating and required earthing arrangement.
Power-supply-to-equipment leads and branched DC connections. Provide the pinout, polarity, branch lengths, and connector part numbers.
Battery leads and DC interconnects for inverter applications, subject to drawing review. Specify lug or ring-terminal dimensions, insulation, routing, and polarity marking.
Workmanship follows IPC/WHMA-A-620 at the class specified on the drawing. 100% continuity is tested in Cavite; HiPot, where specified, is done at Hebei Cloom, China. Other tests and the records supplied are agreed in the quotation.
Specify circuits, pin-to-pin mapping, positive/negative or line/neutral/earth identification, test conditions, acceptance limits, sampling and record format. The test plan is agreed during drawing review before production.
Scroll horizontally to see standards, certification schemes and sources →
| Listed product | Governing PNS / regulation | Coverage and buyer check | Certification scheme | Official source |
|---|---|---|---|---|
| Plugs (list entry 46) | PNS 1486-1:1996; PNS 1572:1997 DAO 8:1997; DAO 15-01:2015 (ICC facilitation) | Household/similar AC plugs, with or without earth: above 50 V through 440 V, up to 32 A; indoor/outdoor. Rubber plugs excluded by this listing. | PS mark licensing / ICC for imports, as applicable; the entry links both procedures. | BPS — Plugs retrieved |
| Socket-outlets (list entry 47) | PNS 1486-1:1996; PNS 1572:1997 DAO 8:1997; DAO 15-01:2015 (ICC facilitation) | Household/similar AC socket-outlets, with or without earth: above 50 V through 440 V, up to 32 A; indoor/outdoor. Check the mating outlet with the plug specification. | PS mark licensing / ICC for imports, as applicable; the entry links both procedures. | BPS — Socket-outlets retrieved |
| Extension cord sets (list entry 48) | PNS 1486-1:1996; PNS 1572:1997 DAO 8:1997; DAO 15-01:2015 (ICC facilitation) | Household extension cord sets. Treat the finished set as its own listed category; a certified component alone does not establish approval of an assembled set. | PS mark licensing / ICC for imports, as applicable; the entry links both procedures. | BPS — Extension cord sets retrieved |
| Flexible cords and fixture wires (list entry 53) | PNS 163:2018 DAO 22-07:2022; updated scope mandatory from 04 July 2023 | Thermoplastic-insulated cords/fixture wires up to 600 V: SPT, SVT, SJT/SJTO, ST/STO, TF/TFN and XTW/CXTW. The list index uses the older label ‘PVC insulated flexible cords’. | PS licensing for local/foreign manufacturers; ICC for non-PS-certified imports, per product and shipment (DAO 22-07, Rule 4). | BPS — Flexible cords, updated scope retrieved |
| Thermoplastic-insulated wires and cables (list entry 54) | PNS 35:2021 DAO 22-07:2022; updated scope mandatory from 04 July 2023 | Solid or stranded copper building wires rated 600 V: TW, THW, THHN, THWN, THWN-2 and NM. This building-wire entry does not establish the classification of a custom power cable assembly. | PS licensing for local/foreign manufacturers; ICC for non-PS-certified imports, per product and shipment (DAO 22-07, Rule 4). | BPS — Wires and cables, updated scope retrieved |
Method: compiled from the DTI-BPS online List of Products Under Mandatory Certification and its linked product pages, retrieved 2026-10-30. Selection rule: electrical wires/cables, flexible cords, plugs, their mating socket-outlets and household extension sets (index entries 46–48 and 53–54); exclude unrelated wiring devices, steel wires and appliances. One row per listed category. Preserve PNS editions and scope limits; use the explicitly dated 04 July 2023 scope for the two wire/cord entries rather than their legacy PNS 163:1994 and PNS 35-1:2004 rows. Certification routes are cross-referenced with BPS Product Certification Schemes and DAO 22-07, Rule 4; buyer checks are editorial guidance. This is a public-source compilation, not factory test data or a claim that every custom assembly falls under these categories.
Philippine Standard (PS) mark licensing covers qualifying local or foreign manufacturers; Import Commodity Clearance (ICC) covers qualifying imported products. Confirm the applicable route and product coverage with BPS for the actual item. The list is not evidence that XUDONG or an offered assembly holds PS/ICC approval.
Facility
Samples and custom prototypes are mainly built at our China partner factory, Hebei Cloom; volume production runs in Cavite or at Hebei Cloom, as the customer requires. Samples built in China are China-origin. Molds are designed and built, including T1 samples, at our China partner factory, Hebei Cloom. Production location is confirmed in the quote.
Coordinate sample approval and volume production with the Cavite engineering desk. Prototype timing and Cavite production timing are separate commitments in the quotation.

Standards & records
Review the agreed workmanship class, inspection plan and record requirements before production. Records are supplied as agreed. The ISO 9001 certificate belongs to Hebei Cloom in China; workmanship standards, material declarations and shipment records are separate evidence categories.
Standards & records
Held by China manufacturing partner Hebei Cloom; the Cavite plant is not separately ISO 9001 certified.
Standards & records
Workmanship follows IPC/WHMA-A-620 at the class specified on the drawing.
Standards & records
BOM-line material compliance declarations available for customer audit packs.
Standards & records
Export documentation is relevant to export shipments. Domestic delivery from Cavite has customs and tax treatment confirmed per transaction under PEZA rules.
Partner certificate — Hebei Cloom; Cavite workmanship and program records.
Related Pages
Wire Harness
Branched harnesses and fixture-board production, with workmanship class and inspection records agreed for the drawing.
Cable Assembly
Coax, power, signal, Ethernet, shielded, robot-flex, and hybrid cable assemblies built in Cavite.
Box Build
Wire harnesses and cable assemblies are built in Cavite, Philippines, or in China, wherever the customer requires; our China partner factory, Hebei Cloom, runs its own wire harness line and performs box build and enclosure integration, with XUDONG coordinating the program.
China+1 Sourcing
Non-China origin program for supply-chain diversification, dual sourcing, and BCP resilience.
Philippines Overmolded Cable Assembly
For molded connector exits, review local overmold sourcing, tooling, and the RFQ checklist for Philippine production.
FAQ
Submit RFQ
Share your application, annual volume and Philippine delivery address. Attach the drawing revision, connector list and BOM if available.
Next Step
Send the drawing, BOM, or current supplier package. RFQ acknowledged the same working day (Mon–Fri); quotation within 3 working days. No obligation.