Build method
- Ask each supplier
- Where are samples built, and how is the process transferred to the volume site?
- XUDONG · Cavite
- Samples mainly built at China partner Hebei Cloom; fixtures and controls are reviewed for volume transfer.
Routing
Philippines · Custom Wire Harness · Contract Manufacturing
Custom and OEM wire harness manufacturing in Cavite, Philippines — contract and low-volume, for industrial and robotics OEMs — with fixture-board production, Class 2 inspection by default (Class 3 on request), and a non-China origin. Built for Philippine electronics, industrial, and OEM manufacturers that want a local Cavite-based contract manufacturer for wire harness and cable assembly — short domestic lead times, English-language engineering, and IPC/WHMA-A-620 Class 2 workmanship (Class 3 on request) without importing.
Philippines Feasibility Review
We acknowledge your RFQ the same working day (Mon–Fri); the quotation follows within 3 working days.
PH
Country of origin
Cavite Economic Zone
Class 2
IPC-A-620 baseline
Class 3 on request
No MOQ
NPI samples
Sample fee & freight extra; built at Hebei Cloom, China
Same day
RFQ acknowledgement
Quote within 3 working days
Wire Harness
Custom and OEM wire harnesses live or die on the board: lay-on routing, breakout dressing, branch geometry, taping cadence, and per-leg labeling. We build harnesses on fixture boards that mirror the production intent, so the sample is representative of the volume run rather than a hand-made one-off.
Contract and low-volume programs are the core of the Cavite floor. Industrial and robotics OEMs use it for harnesses where IPC/WHMA-A-620 Class 2 acceptance (Class 3 on request), IATF 16949 (held by partner Hebei Cloom; Cavite not separately certified), and documented test gates matter more than the lowest unit price. Sample-level PPAP / FAI is available where the program requires it.
There is no minimum-order wall in front of the first article. there is no MOQ for NPI samples, which are built at China partner Hebei Cloom, and the quotation states the real lead time, connector alternates, and documentation path.
IPC/WHMA-A-620 Class 2 by default (Class 3 on request), with crimp cross-section, pull tests and 100% continuity; HiPot, where required, is done at Hebei Cloom, China.
Philippine OEMs work directly with our Cavite engineering desk in English. Drawings, drawing questions, inspection records, and on-site audits are handled locally — no import lead time and no extra relay layer.
Producing in the Cavite Economic Zone means domestic delivery inside the Philippines without ocean-freight lead time (customs and tax treatment for domestic sales from the economic zone is confirmed per transaction) — short turnarounds for local OEM programs, with samples mainly built at China partner Hebei Cloom and volume production in Cavite.
Comparison
Buyers evaluating a contract harness manufacturer want to know the program will be run to a standard and that low volume will not be an afterthought. Use these questions to compare quotations on the same drawing.
| Decision Factor | Ask each supplier | XUDONG · Cavite |
|---|---|---|
| Build method | Where are samples built, and how is the process transferred to the volume site? | Samples mainly built at China partner Hebei Cloom; fixtures and controls are reviewed for volume transfer. |
| Quality baseline | Which certificates apply to the building site, and which PPAP / FAI documents are delivered? | IATF 16949 is held by partner Hebei Cloom (Cavite is not separately certified); IPC/WHMA-A-620 Class 2 baseline (Class 3 on request); sample-level PPAP / FAI documents agreed at quotation. |
| Low-volume / contract fit | What are the sample and production order quantities? | No-MOQ NPI, pilot lots, and volume tiers structured for contract and low-volume work. |
| Documentation | Which records are kept, for how long, and which ship with the lot? | FAI and RoHS / REACH declarations as agreed in the quotation; inspection records kept 3 years. |
| Local manufacturing for Philippine buyers | Is the supplier local, and what are freight lead time, duties and audit access? | Local Cavite production gives Philippine OEMs a 20-working-day production lead time (10 once materials are complete), on-site audit arrangements confirmed with the team, and English engineering support with IPC/WHMA-A-620 Class 2 workmanship (Class 3 on request). |
Program Process
The fastest way to qualify an overseas supplier is to make the first week concrete: drawing review, engineering questions, sample plan, quality documentation, and export assumptions. That is how we structure the kickoff.
01
DXF, PDF, harness-board photos, connector list, annual volume, target lead time, and required documentation are enough for the first review. We can sign your NDA template before drawings are shared; it is not required for an initial review.
02
Cavite engineering checks connector availability, crimp tooling, fixture-board need, cable jacket, test requirements, and any overmold or backshell tooling. We acknowledge the RFQ the same working day; the quotation, with any drawing questions, follows within 3 working days. The quotation includes NPI, pilot, and production pricing.
03
Samples typically take 15 days (30 for complex builds) at Hebei Cloom, China, and carry China origin. Which inspection records ship with the sample (for example pull-force, cross-section or continuity results) is agreed in the quotation.
04
Production starts after the customer approves the sample. Any later drawing or material change goes through the ECN change process, and lots are sampled to AQL S-2.
05
The export paperwork for each shipment (for example the PEZA export record, commercial invoice and packing list) is listed in the quotation. Inspection records are kept for 3 years.
Capability Stack
Fixture-board production, branched assemblies, and documented inspection for industrial, robotics, and adjacent OEM harness programs.
Fixture-board routing, branched assemblies, per-leg labeling, conduit, braided sleeve, and taped breakouts.
Sealed connectors, grommets, and IP-rated exits for industrial and outdoor applications.
High-voltage orange cable, shielded and twisted-pair routing, and EMI-aware dress.
Industrial, robotics, automotive, and energy harnesses built to the applicable acceptance class.
Sample-level PPAP / FAI, IPC/WHMA-A-620 Class 2 inspection (Class 3 on request), and inspection records kept for 3 years.
100% continuity/open-short (QJ100-256), crimp cross-section and pull-force checks in Cavite; HiPot at Hebei Cloom, China where specified.
Facility
Samples and custom prototypes are mainly built at our China partner factory, Hebei Cloom; volume production runs in Cavite or at Hebei Cloom, as the customer requires. Samples built in China are China-origin. Molds are designed and built, including T1 samples, at our China partner factory, Hebei Cloom. Production location is confirmed in the quote.
For a transfer program that balance is the point: close enough to the Asian tooling and connector network to retain engineering leverage, but with a real non-China production origin and an English-speaking interface for overseas buyers.

Certifications & Records
The certificate list is only the front page. For active programs, the audit pack covers the agreed inspection plan, inspection records (kept for 3 years), RoHS/REACH declarations, and sample-level PPAP/FAI on request.
CERT.01
Held by China manufacturing partner Hebei Cloom; the Cavite plant is not separately ISO 9001 certified.
CERT.02
Cable and wire harness acceptance criteria as the inspection baseline; Class 2 by default, Class 3 acceptance applied where the program specifies it.
CERT.03
BOM-line material compliance declarations available for customer audit packs.
CERT.04
Cavite Economic Zone export records that travel with each export shipment's customs paperwork.
Related Pages
Wire Harness
Branched harness capability, fixture-board production, sample-level PPAP / FAI, and IPC/WHMA-A-620 Class 2 inspection by default (Class 3 on request), by build type and industry.
Cable Assembly
Coax, power, signal, Ethernet, shielded, robot-flex, and hybrid cable assemblies built in Cavite.
Box Build
Wire harnesses and cable assemblies are built in Cavite, Philippines, or in China, wherever the customer requires; our China partner factory, Hebei Cloom, runs its own wire harness line and performs box build and enclosure integration, with XUDONG coordinating the program.
China+1 Sourcing
Non-China origin program for supply-chain diversification, dual sourcing, and BCP resilience.
Philippines cable assembly manufacturing
For point-to-point power and signal assemblies built in Cavite (overmolding at partner Hebei Cloom, China), including drawing review and Philippine domestic delivery requirements.
Philippines Overmolded Cable Assembly
For harness legs needing molded strain relief or sealed exits, review the China partner Hebei Cloom overmold tooling and qualification process.
FAQ
Submit RFQ
Attach the harness drawing or board photo, connector list, BOM, and annual volume. We acknowledge the RFQ the same working day (Mon–Fri) and send the quotation within 3 working days.
Next Step
Send the drawing, BOM, or current supplier package. RFQ acknowledged the same working day (Mon–Fri); quotation within 3 working days. No obligation.